Security Escort
Testing and troubleshooting | en
33
Robert Bosch (SEA) Pte Ltd
Hardware Installation Manual
2018.03 | SE3v1.0 | DOC
6
Testing and troubleshooting
6.1
Built-in troubleshooting aids
Notice!
For wiring troubleshooting, refer to the section
Troubleshooting reference
of this manual
where applicable.
Notice!
For SE coordinator and SE receiver troubleshooting, refer to the
Security Escort Coordinator
and Receiver Installation Manual
where applicable.
6.2
Troubleshooting reference
Symptoms
Probable Cause
Possible Solutions
SE coordinator not
responding.
No power to SE coordinator.
If powered by Power over
Ethernet (PoE), check that
the Cat5e cable or the power
sourcing equipment (for
example, the network switch
supplying the PoE) is not
faulty.
If powered by DC input,
check power for 10.8V DC to
13.2V DC. If lower than 10 V
or no voltage present, check
wiring on power side of SE
receiver, repair or replace
cable.
Defective SE coordinator.
If power is present and SE
coordinator is not
responding, replace SE
coordinator.
Summary of Contents for SE3000 Series
Page 1: ...Security Escort SE3000 Series en Hardware Installation Manual ...
Page 2: ......
Page 39: ......
