Bosch Rexroth PST 6 0 Series, Operating Instructions Manual

Page: 226 / 330

1070080029 / 05 Bosch Rexroth AG Electric Drives
and Controls PST 6xx0 | | 226 /330
Information on this product
5.2.4.5 ”E/A DISK 2R” and ”E/A DISK 4R“ I/O modules
Features:
• 22 discrete inputs (24V
DC
) each
• 1 output each as switched relay (1 x ON)
• 14 discrete outputs (24V
DC
) each
Function:
• Coupling of discrete I/O signals.
The I/O modules EA DISK 2R and EA DISK 4R are identical except
for the connector designations (EA DISK 2R: X1x; EA DISK 4R: X2x)
and an internal coding.
If both are used in a WT, the I/O signals used are permanently cou­
pled to the respective module. That is why all I/O signals always ap­
pear at the same I/O module even after exchanging the slots of both
modules.
Table11: Technical data: ”E/A DISK 2R“ / ”E/A DISK 4R“ I/O modules
Operating voltage +24 V
DC
+20 %, -15 %
with max. +/-5 % ripple
Power input max. 3 A
subject to circuitry connected to the signal inputs/
outputs
Power loss 0.5 VA per active input
2.4 VA per active output
Signal inputs
Signal outputs
Fusing of signal out­
puts
logic 1: +16 V ... +30 V, 20 mA
logic 0: -1 V ... +4 V
O0, O13...O15: +24 V, max. 1 A (for solenoid
and prelift valves together)
O1...O10: +24 V, max. 0.2 A
O11...O12: +24 V, max. 0.2 A (floating relay con­
tact)
2 miniature fuses 5 x 20.
O0, O13...O15:
M 1.6 A
O1...O10: M 1.6 A
Voltage supply
Connection: E/A DISK 2R: X10; 4-pole
E/A DISK 4R: X20; 4-pole
STKK, grid 3.5 mm, max. 1.5 mm
2
.
Mating connector is comprised in the delivery.
Cable length: (from power source to consumer)
max. 10 m at 0.75 mm
2
max. 75 m at 1.5 mm
2
Cable type: unshielded, VDE 0281, 0812 (e.g.: Ölflex)
ENGLISH