Bosch Rexroth PST 6 0 Series, Operating Instructions Manual

Page: 294 / 330

1070080029 / 05 Bosch Rexroth AG Electric Drives
and Controls PST 6xx0 | | 294 /330
Service and repair
10.3.2 Firmware update via "FWUpdate"
For firmware update of all timers via the Ethernet field bus interface.
The following is needed to perform a firmware update
•
a PC with the "FWUpdate" software installed,
• a working connection to the PC via the Ethernet field bus interface.
• a BOS database installed on the PC with a valid timer reference
(BOS 6000 installed) and
• the firmware as a *.hex file.
" Proceed as follows:
1.
Start the "FWUpdate" software.
When the software is started, it will search for a valid timer reference
(is read from the BOS6000 database) and show you all properly lin­
ked timers in tabular format:
2.
Use the "SST-Firmware" command button to select the path and file
name of the desired firmware.
Firmware files have the file name extension ”.hex”.
The selected firmware file will be displayed in the corresponding in­
put fields.
3.
Select the timer(s) for which the firmware update is to be carried out
by ticking the proper check boxes at the left margin of the lines.
To select/deselect all of the timers, use the check box at the left mar­
gin of the table's header line.
4.
Select the desired options for the firmware update by ticking the ap­
propriate check box(es). These options will be applicable for all
selected timers.
ENGLISH