Bosch Rexroth PST 6 0 Series, Operating Instructions Manual

Page: 239 / 330

1070080029 / 05 Bosch Rexroth AG Electric Drives
and Controls
PST 6xx0 | | 239 /330
Information on this product
Cable type: copper cable, according to INTERBUS-S spe­
cification
ID code: 47 (dec.)
X13
Diagnostic messages of the module:
U
S
: Unit Supply; power supply available
- RC: Remote bus Check; bus link (coming from previous IB-S
node) exists.
- BA: Bus Active; data transmission is active
- RD: Remote Disable; indicates that the bus link (going to the next
IB-S node) has been switched off.
- TR: Transmit/Receive; signals PCP communication
X12
X15
INTERBUS-S connection IN
(coming from previous IB-S node)
- For pin assignment, refer to page 240
Discrete inputs
- Voltage supply of the signal inputs (24V
DC
, 0 V)
- Signal inputs I0 to I7 (24 V
DC
)
INTERBUS-S connection OUT
(going to the next IB-S node)
- For pin assignment, refer to page 240
X14
Discrete outputs
- Voltage supply of the signal outputs (24V
DC
, 0 V)
- Signal outputs O0 to O7 (24 V
DC
)
Fig.16: Front panel view: ”E/A IBS X_FERN_8EA“ I/O module
ENGLISH