Bosch Rexroth IndraDrive CDB02, Project Planning Manual

Page: 87 / 146

TTL (5 V supply voltage)
See the connection diagram for how to connect the encoder system.
Connection diagram
1) Line cross section ≥ 0.5 mm²; observe allowed encoder cable
length
2) Line cross section ≥ 0.14 mm²
Fig. 8-7: EC connection diagram with TTL encoder system
Power supply 5 V (the voltage is made available via the EC interface)
Technical specification of the power supply: See
chapter "5 V power supply"
on page 92
Cable Length 75 m at most (when using the Sense function)
When you do not use the Sense function, the maximum cable length is re‐
duced (see chapter 8.1.4 "Encoder cable length" on page 94 ).
Technical properties Use the Sense function to ensure stable power supply at the encoder. De‐
scription of the Sense function: See chapter "5 V power supply" on page 92
DOK-INDRV*-CXX02******-PR03-EN-P Bosch Rexroth AG 85/143
IndraDrive Control Sections CSB02, CSE02, CSH02, CDB02
Technical data - functions
Courtesy
of
CMA/Flodyne/Hydradyne
▪
Motion
Control
▪
Hydraulic
▪
Pneumatic
▪
Electrical
▪
Mechanical
▪
(800)
426-5480
▪
www.cmafh.com