manualshive.com logo in svg

Bosch Rexroth IndraControl VDP 08.3, Manual, Page: 34 / 84

Share
Download
Bosch Rexroth IndraControl VDP 08.3 Manual Download Page 34

Fig.5-8:

VDP 40.3 DI, rear view

5.2 

Mounting

5.2.1 

Installation Notes

●

The display is to be installed in such a way that an ergonomic operation

is ensured. Additionally, ensure that all machine components can be seen

by the operator!

●

Avoid  installation  locations  exposed  to  direct  UV  light/sunlight,  as  the

screen readability is reduced and additional heat development can occur.

●

The LED displays on the front panel have to be visible.

●

Lay all connecting cables in loops and use strain reliefs for all cables.

●

Keep as much distance as possible to noise sources.

For maintaining the degree of protection IP 54, use only cable grommets that

fit to the cable cross-sections for cable bushing, see 

chapter 5.2.1  "Installation

Notes" on page 32

.

Designation of the cable grommet (mount‐

ing/sealing kit)

Cable diameter

QT4

4-5 mm

QT5

5-6 mm

QT6

6-7 mm

QT7

7-8 mm

QT8

8-9 mm

Bosch Rexroth AG

 DOK-SUPPL*-VDP*08.3***-PR02-EN-P

 Rexroth IndraControl VDP 08.3/40.3 Operator Terminal

32/81

Dimensions, Installation and Wiring

Summary of Contents for Rexroth IndraControl VDP 08.3





















































































Reviews:

No comments