2
Important Instructions on Use
2.1
Intended Use
2.1.1
Introduction
The Rexroth products represent state-of-the-art developments and manufac‐
turing. They are tested prior to delivery to ensure operating safety and relia‐
bility.
If the products are not used as intended, sit‐
uations occur that can result in damage to
property and injury to persons.
WARNING
The products are designed for the use in an industrial environment and may
therefore only be used for the intended purpose. If they are not used as in‐
tended, situations causing personal injury as well as material damage can oc‐
cur.
Rexroth is not liable for damages resulting from unintended use.
In such cases, the guarantee and the right to payment of dam‐
ages resulting from unintended use are forfeited. The user alone
carries all responsibility of the risks.
Before using Bosch Rexroth products, the following requirements must be
met to ensure intended use of the products:
●
Personnel who in any way, shape, form or use one of our products must
first read and understand the relevant safety instructions and be familiar
with the intended use of the products.
●
If the product takes the form of hardware, then they must remain in the
original state; in other words, no structural changes are permitted. The
decompilation of software products or the alteration of source codes is
not permitted.
●
Do not install or operate damaged or faulty products.
●
Ensure that the products have been installed in the manner described in
the relevant documentation.
2.1.2
Areas of Use and Application
Danger of destruction of the device if not ex‐
pressly stated accessories, mounting parts
and other components, cables, lines, soft‐
ware and firmware is used.
NOTICE
The VAU 01.1U may only be used with the accessories and mounting parts
listed in this documentation. Components that are not expressly mentioned
must neither be attached nor connected. The same is valid for cables and
lines.
Operation must only be carried out with the hardware component configura‐
tions and combinations that are expressly specified and with the software and
firmware indicated and specified in the respective documentation and func‐
tional descriptions.
DOK-SUPPL*-VAU*01.1U**-PR03-EN-P
Rexroth IndraControl VAU 01.1U UPS with USB interface
Bosch Rexroth AG
7/63
Important Instructions on Use
