IDN/S-0-0390 „Diagnostic number“
IDN/S-0-1500.0.32 „IO Diagnosis Message“
IDN/S-0-1303.0.10 „Diagnosis trace buffer no1“
IDN/S-0-1303.0.11 „Diagnosis trace buffer no2“
IDN/S-0-0095 „Diagnosis message“
IDN/S-0-1305 „sercos time“
IDN/S-0-1303.0.12 „Diagnosis trace buffer no3“
generated
enter
enter
enter
...
...
Element 1
Element 2
Element n
Element 100
...
...
Element 1
Element 2
Element n
Element 100
...
...
Element 1
Element 2
Element n
Element 100
Diagnostic event
Error (C1D), Warning (C2D)
...
generated
generated
Fig. 9-7:
Generation of acyclic diagnostic parameters
The following table displays the status codes of the FSP_IO for the diagnostic
class warning (C2D) that are supported by the S67-S3-BK-DI8-M8 sercos
field bus coupler:
Status
code
Name
Description
0x1000
General error
General / unknown warning
0x2300
Current on the
device output side
Overload at an output channel
0x2340
Short circuit (device
output side)
Short circuit (or overload) at an output channel
0x2344
Output overload
Overload or short circuit of the field supply
0x2350
Open circuit
Interruption (no load) at an output channel
0x2360
Wire break
Wire break on an input or output channel
0x3410
Sensor supply
Undervoltage of the logic/sensor supply (V
LS
)
0x3420
Actuator supply
Undervoltage of actuator supply (V
A
)
0x4200
Device temperature Overtemperature on an input or output channel
0x8910
Measured value
overrange
Value of the measuring and user range has been
exceeded at an input channel
0x8920
Measured value
underrange
Under-run of the measuring and user range at an
input channel
Tab. 9-29:
Supported FSP_IO status codes for warnings (C2D)
The following table displays the status codes of the FSP_IO for the diagnostic
class error (C1D) that are supported by the S67-S3-BK-DI8-M8 Sercos field
bus coupler:
DOK-CONTRL-S67S3BKDI8*-AP03-EN-P
Rexroth IndraControl S67 Sercos Coupler 8 Digital Inputs (M8)
Bosch Rexroth AG
97/139
Sercos
