Bosch Rexroth IndraControl S67 Series Application Description Download Page 92

Page: 92 / 142

S67-DIO8-M8/S67-DIO8-M12x8 (8 DIO + X Counter)

IndraControl S67 I/O-Modul (IOM)

S-0-1502.x.0 „Digital Output“

S-0-1503.x.0 „Digital Input“

IDN/S-0-1503.x.1 „Name of IO_FG“

IDN/S-0-1503.x.2 „Configuration of IO_FG“

IDN/S-0-1503.x.7 „Channel quantity PDIN“

IDN/S-0-1503.x.8 „Channel width PDIN“

IDN/S-0-1503.x.9 „PDIN“

IDN/S-0-15XX.SI.SE „Optional Parameter“

IDN/S-0-15XX.SI.SE „Standard Parameter“

IDN/S-0-1502.x.1 „Name of IO_FG“

IDN/S-0-1502.x.2 „Configuration of IO_FG“

IDN/S-0-1502.x.11 „Channel quantity DIAGOUT“

IDN/S-0-1502.x.12 „Channel width DIAGOUT“

IDN/S-0-1502.x.13 „DIAGOUT“

IDN/S-0-1502.x.15 „Channel quantity DIAGIN“

IDN/S-0-1502.x.16 „Channel width DIAGIN“

IDN/S-0-1502.x.17 „DIAGIN“

IDN/S-0-1502.x.3 „Channel quantity PDOUT“

IDN/S-0-1502.x.4 „Channel width PDOUT“

IDN/S-0-1502.x.5 „PDOUT“

S-0-1506.x.0 „Counter“

IDN/S-0-1506.x.1 „Name of IO_FG“

IDN/S-0-1506.x.2 „Configuration of IO_FG“

IDN/S-0-1506.x.7 „Channel quantity PDIN“

IDN/S-0-1506.x.8 „Channel width PDIN“

IDN/S-0-1506.x.9 „PDIN“

IDN/S-0-1506.x.3 „Channel quantity PDOUT“

IDN/S-0-1506.x.4 „Channel width PDOUT“

IDN/S-0-1506.x.5 „PDOUT“

IDN/S-0-1501.x.20 „Parameter Channel Transmit“

IDN/S-0-1501.x.19 „Parameter Channel Receive“

Fig. 9-3:

Representation of the IndraControl S67 I/O module S67-DIO8-M8/

S67-DIO8-M12x8 in the FSP_IO

The 8 digital input and output channels are displayed here by the function

groups S-0-1502 "digital output" and S-0-1503 "digital input" of the same

name and the counter data is displayed by the additional function group

S-0-1506 "counter".
The optional diagnostic parameters IDN/IO_FG.x.13 "DIAGOUT" and IDN/

IO_FG.x.17 "DIAGIN" are always assigned to the function group with the

smallest number, in this example S-0-1502 "digital output".

9.2

Addressing (Sercos Address)

The Sercos address is automatically assigned by the Sercos master in CP2

or set manually on the IndraControl S67 field bus coupler by the address se‐

lector switch on the top of the housing (under the transparent protective dust

cover). In its delivery status, the address selector switch is deactivated and

the Sercos address has the value 1. More information on the address switch

is located in

chapter 4.5 "Address and Operation Mode Switch (DIP Switch)"

on page 19

Automatic address assignment
To use the automatic assignment function for the Sercos address, the ad‐

dress selector switch is to be deactivated (switch 10 in position ON). The

Sercos address is automatically assigned by the write access to parameter

IDN/S-0-1040 "Sercos address". The written address is immediately activated

and permanently saved in the coupler. This address is automatically reactiva‐

ted after another power-on-reset.
Manual address assignment
To use the manual assignment function for the Sercos address, the address

selector switch is to be activated (switch 10 in position OFF). Using switches

1 … 9, the desired Sercos address can now be configured in BCD coding.

Bosch Rexroth AG

DOK-CONTRL-S67S3BKDI8*-AP03-EN-P

Rexroth IndraControl S67 Sercos Coupler 8 Digital Inputs (M8)

90/139

Sercos

Summary of Contents for Rexroth IndraControl S67 Series















































































































































Search results

Summary of Contents for Rexroth IndraControl S67 Series

Reviews:

Related manuals for Rexroth IndraControl S67 Series

Brands by name

Popular brands

Bosch Rexroth IndraControl S67 Series, Application Description

Search results

Summary of Contents for Rexroth IndraControl S67 Series

Reviews:

Related manuals for Rexroth IndraControl S67 Series

Brands by name

Popular brands