Possible damage to property due to improper
mounting of the top-hat rail
NOTICE
●
Fasten the top-hat rail adequately.
●
Connect the top-hat rail to a functional ground.
●
Mount the control on the top-hat rail as the top-hat rail is
among other things used for heat dissipation and grounding.
●
Mount the control in a control cabinet or an appropriate housing.
Mounting steps
Mounting step: Mounting the control on the top-hat rail
1.
Hang the control into the top-hat rail from the top (A in
).
2.
Then latch in the control by exerting slight pressure onto the bottom
housing part (B in
).
Fig.10-12:
Mounting the control on the top-hat rail
Observe the minimum distances for cooling the control, see
10.1 "Installation Notes" on page 25
.
Mounting step: Mounting Rexroth Inline terminals (optional) in series
1.
If necessary, now mount the Rexroth Inline terminals in series (see also
"Automation Terminals of the Rexroth Inline Product Range" DOK-
CONTRL-ILSYSINS***-AWxx-, parts number: "R911317021").
2.
First latch on the terminal that is required to set up the station, perpen‐
dicularly to the top-hat rail (A in
).
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG
31/65
Mounting, Dismounting and Electrical Installation
