Fig.10-17:
Remove the labeling field, removing the connectors
4.
Remove the connectors (B in
5.
Remove the power connector from the control.
This ensures that the feathers of the voltage jumpers and the keyway/
feather key connection are prevented from damage. Moreover, the ter‐
minal can be accessed more easily.
6.
Push the release mechanism (1 in
). Then remove the terminal
perpendicularly to the top-hat rail (2 in
).
Fig.10-18:
Before dismounting the control, the first Rexroth Inline terminal has to
be removed
Dismounting step: Removing the control from the top-hat rail
1.
Loosen the release levers mounted at the bottom side by pulling the re‐
lease lever downwards using a screwdriver.
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG
35/65
Mounting, Dismounting and Electrical Installation
