1
About this Documentation
Overview – target groups and
product phases
The activities, product phases and target groups that refer to the present doc‐
umentation are marked in red color in the following figure.
Example: In the product phase "Mounting (assembly/installation)", the target
group "mechanic/electrician" can execute the activity "install" using this docu‐
mentation.
Selection
En g in e e rin g
Design engineer
Mechanic/
electrician
S e rvic e
P re s a le s Afte rs a le s
Mounting
Product
phases
Target
groups
Activities
(assembly/installation)
Commissioning
Operation
De-
commissioning
Programmer
Technologist
Process
specialist
Programmer
Commissioning engineer
Technologist
Process specialist
Machine
operator
Maintenance
technician
Mechanic/
electrician
Disposal company
To select
To prepare
To design
To construct
To unpack
To mount
To install
To parameterize
To program
To configure
To simulate
To optimize
To test
To operate
To maintain
To remove
faults
To create
the NC program
To dismount
To dispose
Fig.1-1:
Assigning the present documentation to the target groups, product
phases and activities of the target group
This document instructs the technical staff of the machine manufacturer on
how to perform the mechanic and electrical installation in a safe way and on
how to commission the device.
Required qualifications: Individual who is able to assess the tasks assigned
and identify possible safety risks owing to qualification in the subject, knowl‐
edge and experience. The individual should also be familiar with the stand‐
ards and regulations.
Availability
This document is part of the present product delivery. This document has to
be available to the user at any time. The product has to be passed on togeth‐
er with this document only.
Scope
This document is valid for all variants of the control, whose type designation
code starts with:
CML25.1...
CML45.1...
CML65.1...
CML85.1...
The type designation code specifications are located on the type plate of the
device, see also
chapter 2 "Product Identification and Scope of Delivery" on
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG
5/65
About this Documentation
