13
Error Causes and Error Elemination
"System is booting" and "No Com‐
pact Flash" displays
The "System is booting" and "No Compact Flash" displays directly refer to the
control while other displays are system-specific. Initiate the action listed in the
following table if the LED indicates an error or a notice.
Further operating and error dis‐
plays and remedial measures -
"Stop" LED
On the front side of the control, there is the "Stop" LED. The meaning of the
LED states is listed in the following table.
Display
Meaning (firm‐
ware-depend‐
ent)
Action
Off
Normal state
-
Lights in red
STOP / system
error
The errors and corresponding actions are system-
specific. E.g.
●
No display connected > Connect the dis‐
play.
●
No Compact Flash > Insert the Compact
Flash card.
Flashes in red
Outputs
are
blocked
-
Fig.13-1:
Operating and error displays on the front side of the control: "Stop"
LED
Further operating and error displays are located on the individual modules
and terminals. For the meaning of the further displays, please refer to the rel‐
evant documentation, see also
fig. 1-2 "Further documents" on page 6
.
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG
51/65
Error Causes and Error Elemination
