About this manual
9/176
3 842 530 344/2014-05, MIT: ID 40,
Bosch Rexroth AG
1 About this manual
1.1 Scope of Application
This manual describes the following system components of the ID 40 identification
and data memory system:
• ID 40/MDT2K mobile data tag
• ID 40/MDT8K mobile data tag
• ID 40/MDT32K mobile data tag
• ID 40/SLK-PDP read/write head
• ID 40/SLK-IBS read/write head
• ID 40/SLK-CAN read/write head
The functions described refer to the 4.x versions of the ID 40/SLK software.
Refer to the following documents for more information on the ID 40 system:
Table 1: Required and supplementary documentation
Document
Edition
Order no.
ID 40 brochure
en
3 842 528 602
ID 40/SLK assembly instructions
de/en/fr/it/es/pt
3 842 527 942
ID 40/MDT assembly instructions
de/en/fr/it/es/pt
3 842 527 943
Programming manual
ID 40 function blocks for Rexroth CL and
PCL controllers
en
3 842 406 191 *)
Programming manual
ID 40 function blocks for Siemens S7
controllers
en
3 842 406 190 *)
Operating instructions for ID 40 configura-
tion and diagnostic program
en
3 842 406 119 *)
*) Manual is part of the software CD-ROM and is not available in print form.
1.2 Layout of this manual
This manual is structured so each chapter builds on the previous chapter. It
is recommended that readers who are unfamiliar with identification systems
read through this entire manual. Readers who have experience with the ID80/E
identification system can skip Chapters 3 and 4.
• Chapter 2 contains an introduction to the ID 40 identification system and describes
how the mobile data tag and read/write head function.
• Chapter 3 shows the critical steps for installing the ID 40 on transfer systems.
• Chapter 4 describes how the mobile data tag stores information.
• Chapter 5 describes how the read/write head stores information.
• Chapter 6 explains how the read/write head works as well as how data is
exchanged via the fieldbuses.
• Chapter 7 describes how data is exchanged via Profibus DP.
• Chapter 8 describes how data is exchanged via Interbus-S.
• Chapter 9 describes how data is exchanged via CANopen.
PROOF COPy 1 | 20.05.2014 | FOR INTERNAL USE ONLy
EN
GLISH
