Bosch Security Systems | 2011-02
Praesideo 3.5
| Installation and User Instructions | 9 | System Configuration
en
| 383
6 Submit the changes. Note that the changes are not
permanent until the configuration is saved (see
section 40.4.4 and section 40.4.5).
46.2.3 Delete a call macro
Proceed as follows to delete a call macro:
1 Go to
Configure > Call characteristics > Call macro
to
open the
Call macro
page.
2 Select the call macro that has to be deleted from the
Name
dropdown list.
3 Click the
Delete
button to delete the call macro. A
pop-up window asks to confirm this choice.
4 Click the
OK
button to confirm that the call macro
must be deleted. The deleted call macro is no longer
available from the
Name
dropdown list.
5 Submit the changes. Note that the changes are not
permanent until the configuration is saved (see
section 40.4.4 and 40.4.5.
