Bosch Security Systems | 2011-02
Praesideo 3.5
| Installation and User Instructions | 9 | System Configuration
en
| 397
47.3.25 Back-up power mode
The
Back-up power mode
action is used to put the system
in the back-up power mode. In this mode, all calls
below a specified priority (see section 44.4) are aborted.
See figure 47.32 for an overview of the
Action
programming
page for a
Back-up power mode
key.
47.3.26 Synchronize time
The
Synchronize time
action is used to set the internal
clock of the network controller to the nearest minute to
synchronize the clock with a master. See figure 47.33 for
an overview of the
Action programming
page for a
Synchronize time
key.
Note
This action can also be assigned to control
inputs.
figure 47.32: Back-up power mode key
Note
This action can also be assigned to control
inputs.
figure 47.33: Synchronize time key
