Bosch NEI-308V05-13WE User Manual Download Page 57

Page: 57 / 124

Dinion IP Infrared Imager

Configuration via IP, Advanced Mode | en

Bosch Security Systems, Inc.

User Manual

F.01U.263.416 | 3.1 | 2012.09

Copy mode to

No, 2 - 6

Mode Copied (Not Copied) When you select a mode, the Mode

Copied is “Copied!”

When you click Restore Mode Defaults, the Mode Defaults is

“Restored!”

Mode Defaults

Restore Mode (Yes, No)

9.3.2

Picture Settings: ALC

ALC level

Adjust the video output level (-15 to 0 to +15).

Peak average

Adjust the balance between peak and average video control

(-15 to 0 to +15).

At -15, the camera controls the average video level.

At +15, the camera controls the peak video level.

Speed

Adjust the speed of the video level control loop (Slow, Medium,

or Fast).

9.3.3

Picture Settings: Shutter/AGC

Shutter

–

AES

(auto-shutter) — The camera automatically sets the

optimum shutter speed for manual iris lenses. The camera

tries to maintain the selected default shutter speed (1/30,

1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/

10K) as long as the light level of the scene permits.

–

- Flickerless mode avoids interference from light

sources (recommended for use with video iris or DC iris

lenses only).

–

Fixed

- Allows a user defined shutter speed (1/60 [1/50],

1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/

10K).

Default shutter

The default shutter is 1/60. This value does not appear for the

FL Shutter mode.

Summary of Contents for NEI-308V05-13WE





























































































































Search results

Summary of Contents for NEI-308V05-13WE

Reviews:

Related manuals for NEI-308V05-13WE

Brands by name

Popular brands

Bosch NEI-308V05-13WE, User Manual

Search results

Summary of Contents for NEI-308V05-13WE

Reviews:

Related manuals for NEI-308V05-13WE

Brands by name

Popular brands