en
Scales
48
1.
Hold the beating whisk at the bot-
tom with one hand and release the
lock nut clockwise using a spanner
wrench.
→ Fig.
2.
To change the distance, turn the
tool.
→ Fig.
Observe the values in the table:
Setting
Distance
Optimum setting
3 mm
One turn clockwise
1 mm more
One turn anticlock-
wise
1 mm less
3.
Press the release button and push
the swivel arm down until it en-
gages.
4.
Check the setting.
5.
Press the release button and raise
the swivel arm until it engages.
6.
Hold the beating whisk at the bot-
tom with one hand and tighten the
lock nut anticlockwise using a
spanner wrench.
Scales
Scales
Your appliance is equipped with a set
of scales. You can weigh ingredients
individually.
The base unit has 4 weight sensors
in its feet.
The following factors can falsify the
measuring result:
¡
Feet not standing on the work sur-
face properly
¡
Work surface vibrating
¡
Objects underneath the base unit
¡
Ingredient quantities less than 5 g
or 0.01 lb
¡
Base unit slipped
¡
Base unit touched
¡
Objects on the base unit
Display values of scales
Observe the following values when
using the scales.
Display unit in grams
Display range
-990 g to 5000 g
Display steps
5 g
Display unit in pounds
Display range
-2.20 lb to 11.00 lb
Display steps
0.01 lb
Tip:
You can change the display
units of the scales at any time.
→
"Changing the display units of the
Weighing ingredients
Requirements
¡
The bowl is inserted or an access-
ory is fitted.
¡
The rotary switch is set to
.
¡
The mains plug is inserted.
1.
Press and do not touch the ap-
pliance again.
a
The scales will be calibrated.
a
The display shows "- - - -".
2.
Wait for calibration to finish.
a
The display shows "0 g" or
"0.00 lb".
3.
Add the required ingredient.
a
The display shows the weight.
4.
To weigh further ingredients, select
one of the following options:
‒
Add further ingredients and read
off the total weight.
‒
Press and wait until the dis-
play shows "0 g" or "0.00 lb".
5.
To switch off the scales, press or
start processing.
Tip:
Also use the scales together
with the accessory. Weigh the in-
gredients directly when adding them,