Bosch MMB43 GB Series, Instruction Manual

Page: 5 / 55

14 Robert Bosch Hausgeräte GmbH
en
,
Safety systems
Start lock-out
The appliance cannot be switched on until
the blender jug has been turned firmly into
place.
Automatic disconnection
The appliance switches off automatically
if the blender jug accidentally becomes
detached during operation.
Overload protection
If the motor switches itself off while the
appliance is being used, the overload
protection feature has been activated.
Possible causes:
– very large amounts of ingredients,
– appliance operated too long.
If a safety system is activated,
see “Troubleshooting”.
Overview
These operating instructions refer to various
models. An overview of the different models
can be found on the illustrated pages
(Fig.

).
Please fold out the illustrated pages.
1 Motor block
2 Rotary switch with illuminated ring
The illuminated ring flashes slowly when
the appliance is ready for use (on).
The illuminated ring is lit continuously
when the appliance is in operation.
Rapid flashing signals a fault
(see “Troubleshooting”).
2a) MMB43.. :
0/off = Stopp
on = Appliance switched on
1 = Lowest operating speed
5 = Highest operating speed
2b) MMB64.. :
0/off = Stopp
on = Appliance switched on
min = Lowest operating speed
max = Highest operating speed
Pulse = pulse circuit at maximum speed,
hold down switch for required
duration
2c) MMB65.. :
0/off = Stopp
on = Appliance switched on
min = Lowest operating speed
max = Highest operating speed
3 Quick-selection buttons
Preset buttons for optimum results.
For some models:
= for crushing ice cubes (Crush-
ice). Press button 1x briefly.
= For making mixed drinks and
smoothies.
Press button 1x briefly.
= For cutting ingredients
in the universal cutter.
Press button 1x briefly.
= Pulse circuit at maximum speed.
Hold down button for required
duration.
When the quick-selection buttons /
have been pressed, the preset
programme runs. To end the programme
early, press any quick-selection button
or turn the rotary switch to 0/off.
4 Cord store
5 Drive
6 Blade holder with blender/cutting blade
and seal
For some models. is used for the blender
jug and the universal cutter jug.
7 Blender jug made of borosilicate glass
Especially heat-resistant, even very hot
ingredients can be processed.
8 Lid with feed tube
9 Measuring cup with scale (max. 50 ml)
10 Smoothie insert *
For the preparation of fruits and other
ingredients into juices and smoothies.
The insert ensures that pips and other
solid ingredients are filtered out and
do not get into the drinks.
11 Universal cutter jug *
*
Not all models.
Operation
Preparation

Before operating the appliance and
accessories for the first time, clean
thoroughly; see “Cleaning and servicing”.

Place motor block on smooth, stable and
clean base.

Unwind the cable to the required length.
MMB43-64_de-ar.book Seite 14 Montag, 2. Februar 2015 8:48 08
5
en