15
en
Predetermined breaking point
Predetermined
breaking point
To prevent serious damage to your
appliance if the mincer is overloaded, the
driver has a notch (predetermined breaking
point). If an overload occurs, the driver
breaks instead. However, the driver can
easily be replaced.
Otherwise spare parts with a predetermined
breaking point are not a component of our
warranty obligations.
Such spare parts can be purchased from
customer service (order no. 753348).
Operation
W
Risk of injury!
Do not insert mains plug until all
preparations for working with the appliance
are complete.
■
Before operating the appliance
and accessories for the first time,
clean thoroughly; see “Cleaning and
servicing”.
X
Fig.
B
■
Stow perforated discs in the storage
compartment.
■
Stow individual parts of the sausage
filler attachment and kebbe attachment
in the pusher and close the pusher with
the lid.
Assembling the mincer
attachment
X
Fig.
C
■
Take perforated disc with required
hole diameter out of the storage
compartment.
■
Insert worm gear into the housing.
■
Put blade on the worm gear. Blades
must face the perforated disc.
■
Put perforated disc with the required
hole diameter on the worm gear.
Recess on the perforated disc must
be situated on the lug in the housing.
■
Screw on threaded ring clockwise. Do
not tighten the threaded ring too tight.
■
Disassembly is in reverse order.
Use for:
– processing raw or cooked meat, bacon,
poultry and fish.
– Do not process bones!
– Process steak tartare through the
mincer twice.
Assembling sausage filler
attachment
Note:
The parts of the mincer attachment
(
without perforated disc and blade
) are
used.
X
Fig.
D
■
Take nozzle (A) and bearing ring (D) out
of the pusher.
■
Insert worm gear into the housing.
■
Insert nozzle into the threaded ring.
■
Put bearing ring on the worm gear and
hold in place.
Recess on the bearing
ring must be situated on the lug in
the housing.
■
Screw on threaded ring with nozzle
clockwise. Do not tighten the threaded
ring too tight.
■
Disassembly is in reverse order.
Use for:
Filling artificial and natural casings with
sausage meat.
Assembling kebbe attachment
Note:
The parts of the mincer attachment
(
without perforated disc and blade
) are
used.
X
Fig.
E
■
Take shaper (B) and conical ring (C) out
of the pusher.
■
Insert worm gear into the housing.
■
Insert shaper into threaded ring.
■
Put conical ring on the worm gear and
hold in place.
Recess on the conical
ring must be situated on the lug in
the housing.
■
Screw on threaded ring with shaper
clockwise. Do not tighten the threaded
ring too tight.
■
Disassembly is in reverse order.
Use for:
Shaping dough tubes.
