KBN & KBE Series Cameras
Installation of KBN (Indoor) Cameras | en
27
VIDEO
DC 12V
AC 24V
ALARM
ETH
Figure 5.3
IP Camera Rear View
5. Adjust the lens to customize the view.
6. If custom camera setup is required, see the camera
Installation Instructions included in the Instruction Booklet
Packet.
7. Once the desired view is achieved, remove the coax cable
from the Video terminal on the camera. Reconnect the
original coax cable (if using an analog camera).
8. Slide the housing cover back over the camera and tighten
the two captive screws on the back of the housing.
Bosch Security Systems, Inc.
Installation Manual
F.01U.215.198 | 4.0 | 2011.01
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
