KBN & KBE Series Cameras
Installation of KBN (Indoor) Cameras | en
23
3. Determine if you will route the cables behind the mounting
surface or through the opening (grommet) at the bottom of
the mount.
–
If connecting the cables behind the mounting surface,
route the UTP Video/Ethernet and the power cable
through the mount, as shown in the graphic below..
–
If routing the cables through the opening (grommet)
at the bottom of the mount, as shown in the graphic
below (with the number 1 pointing to the opening),
follow these substeps:
a.
Loosen the top two screws (item 2 below) on the rear
of the housing. These screws are captive and will not
Bosch Security Systems, Inc.
Installation Manual
F.01U.215.198 | 4.0 | 2011.01
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
