5
KBN & KBE Series Cameras
Installation of KBN (Indoor) Cameras | en
21
Installation of KBN (Indoor) Cameras
WARNING!
This installation should be made by a qualified service person
and conform to all local codes.
1. Prepare and secure the mount to the wall or mounting
surface as described in the LTC 9215/00 Installation
Manual included in the Instruction Booklet Packet.
NOTICE!
If you plan to route cables out the back of the mount, ensure
that the placement of the mount allows space behind the
mounting surface to route and connect wires.
2. Follow the steps in the subchapters below, depending on
the model of camera that you are installing (analog or IP).
5.1
Connecting Analog Cameras
1. Connect the male BNC connector to the female BNC
connector routed through either the back end or through
the bottom hole of the mount.
or
Figure 5.1
Cable Routing Options
2. Make the power connections as detailed in
Section Power
Connections, page 19
.
Bosch Security Systems, Inc.
Installation Manual
F.01U.215.198 | 4.0 | 2011.01
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]