en
49
Observing the drinking water quality
All materials used to manufacture the water dispenser
are odourless and tasteless.
If the water has an after-taste, this may be caused by
the following:
■
The mineral and chlorine content of the drinking
water.
■
The material that the household plumbing or water
mains are made of.
■
The freshness of the drinking water. If water has not
been dispensed for a long period of time, the water
may taste "stale". In such cases, draw off and throw
away about 15 glasses of water.
We recommend that you regularly draw off a certain
amount of water from the water dispenser and do not
switch the appliance off. This will maintain the best
water quality.
Note
The water filter supplied only filters particles out of the
water supply; it does not remove bacteria or microbes.
Dispensing water
1. Press the "Water" button. The display panel shows
the "Water" symbol.
2. Press a glass against the dispenser lever until the
glass is filled with the desired amount of water.
Tip
The water from the water dispenser is cooled to a
pleasant temperature for drinking. If you prefer the
water to be colder, dispense some ice cubes into the
glass before drawing the water.
Dispensing ice
Only hold the container against the dispenser lever until
the container is half full of ice. Otherwise, the ice in the
ice-cube dispenser spout may cause the container to
overflow or block the ice cube dispenser spout.
If crushed ice was dispensed before dispensing ice
cubes, there may still be some crushed ice in the
dispenser spout. It will come out together with the first
few ice cubes.
1. Press the "Ice cubes/Crushed ice" button until the
display shows the "Ice cubes" or "Crushed ice"
symbol.
2. Press a suitable vessel against the dispenser lever
until it is filled with the desired amount of ice.
