Bosch IntuiKey, User Manual

Page: 42 / 50

38 en | IntuiKey Keyboard
F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
– Add Scene to Tour
This softkey adds a shot to the camera’s tour. Pressing the softkey changes the status
display to the following.
Figure B.3 Allegiant Add Scene Status Display
– Not Used
– Aux On
Press this softkey to enter a number associated with an auxiliary command. The status
display changes to an entry box.
– Camera Functions
Displays a submenu with direct links to various Camera Functions menus (see Figure A.2
on page 34 ).
Figure B.4 Main Camera Functions Menu
Pressing any camera function softkey causes a second softkey menu to appear. If the function
contains a user-selectable choice, the options are indicated as two buttons. The button text
represents the options indicated on the display (e.g. increase/decrease, on/off, etc.).
Upon command completion, or after a time-out of approximately ten (10) seconds, the softkey
display reverts to the Camera Functions menu. See the table on the next page for a list of
available camera commands as they apply to the various camera models.
– Advanced Menu
Press this softkey to enter the main on-screen programming menu of G3 and Day/Night
Series AutoDomes having firmware of 2.0 or higher.
Allegiant
Add Scene
----
i
NOTICE! If ENTER is held down, the Aux command auto-repeats until the key is released.
Exit
Tour
Commands
Factory
Default
Add Scene
to Tour
AutoDome
Lens
AutoDome
Camera
AutoDome
OSD
Commands
AutoDome
General
Commands
Pan/Tilt
Commands
R/D
Commands
Commands
AutoDome
Misc
Commands