Bosch IntuiKey User Manual Download

Page: 13 / 50

IntuiKey Keyboard

Controlling Allegiant Series Video Switchers | en

Bosch Security System, Inc.

User Manual

F.01U.080.637 | 1.92 | 2008.12

Alarm Control

Alarm commands control the system’s automatic video switching

capabilities in response to alarm signals activated in the Allegiant

system. The camera activated by an alarm is normally the same as

the alarm number, but this relationship can be changed using the

optional LTC 8059/00 Master Control Software for Windows® or

the optional LTC 8850/00 Graphical User Interface software

package. These optional software packages even permit up to

four (4) cameras to be alarmed by a single alarm input.

Figure 2.4

Alarm Control Menu

–

Arm/Disarm Alarm

To arm/disarm an individual alarm on the monitor currently

controlled by the keyboard:

Press the Arm/Disarm Alarm softkey. The status display

changes to the following:

Enter the alarm number to be armed/disarmed, using

the numeric keypad.

Press ENTER.

–

Arm/Disarm All Alarms

To arm/disarm all alarms on the currently controlled monitor,

simply press the Arm/Disarm All Alarms softkey.

–

Arm Monitor

Press the Arm Monitor softkey to arm the monitor currently

controlled by the keyboard, permitting cameras for armed

alarms to automatically display when an alarm occurs.

NOTE:

Alarm video appears on a given monitor only if the monitor

is armed and the alarm is armed for that monitor. The on-screen

monitor status display shows MA (Monitor Armed).

–

Disarm Monitor

Pressing the Disarm Monitor softkey disarms the monitor

currently controlled by the keyboard, thus prohibiting the

monitor from responding to alarms.

Exit

Arm

All

Disarm

All

Alarms

Arm

Alarm

Alarms

Disarm

Monitor

Arm

Monitor

Summary of Contents for IntuiKey



















































Search results

Summary of Contents for IntuiKey

Reviews:

Related manuals for IntuiKey

Brands by name

Popular brands

Bosch IntuiKey, User Manual

Search results

Summary of Contents for IntuiKey

Reviews:

Related manuals for IntuiKey

Brands by name

Popular brands