Bosch IntuiKey, User Manual

Page: 21 / 50

IntuiKey Keyboard Controlling Allegiant Series Video Switchers | en 17
Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12
Error 53 Switcher Empty The user has attempted to control a sequence using the NEXT,
PREV, RUN, or HOLD keys, without there being a sequence loaded.
Error 55 SEQUENCE Priority The switcher sequence being requested or cleared requires
monitors that are in use by a user of equal or higher priority.
Contact a user with higher priority or have the system administrator
clear the monitors in question.
Error 56 SEQUENCE Request The user has attempted to load a sequence that is being edited in
the PROGRAM mode. Once editing is complete, the sequence may
be loaded.
Error 58 SEQUENCE Request The sequence being requested is a relative sequence, and the user
is only permitted access to absolute sequences.
Error 60 PROGRAM Request The user has attempted to program a sequence that is currently
running. The sequence must first be stopped before any editing can
be performed.
Error 62 PROGRAM Request The user has attempted to program a new sequence when the
sequence memory space has been depleted. Delete unused
sequences, then program the new sequence.
Error 63 PROGRAM Request Another user is already programming a sequence on this monitor.
Error 70 Monitor No Allocated to Group This monitor cannot be used for alarm operations; it has not been
designated as alarm-capable by the system programmer.
Error 71 Step Monitor Required A group of alarm monitors may not have an armed Review (display)
monitor without having armed Step (sequence) monitors.
Error 78 Must Enter Alarm Number A specific alarm number must be entered when arming or disarming
an alarm.
Error 80 Trunk Not Available An attempt was made to access a remote camera connected to a
satellite system, but no unused trunk lines are currently available.
Error 81 Satellite Trunk Seized The camera currently viewed has changed because an operator with
a higher priority has selected a different camera that seized the
trunk line from the satellite.
Error 89 Internal Stack Error A stack overflow within the system has occurred. Report this to the
manufacturer.
Error 90 Keyboard Entry Undefined The keyboard entry is not defined. Check the appropriate section of
the instruction manual for the desired operation and try again.
Error 92 Keyboard Entry Out of Range The data entered for a valid command was not in the permissible
range. Check the appropriate section of the instruction manual for
acceptable ranges for the command in question and try again.
Error 94 Keyboard Entry Invalid An invalid character was received from the keyboard. Usually this
indicates a communications error. Verify that the keyboard-to-
system cable is not producing an intermittent connection.
Error 95 Keyboard Entry Incomplete The control sequence sent from the keyboard was incomplete.
Usually this indicates a communications error. Verify that the
keyboard-to-system cable is not producing an intermittent
connection.
Error 96 * (STAR) Undefined The * key has been pressed, but there is no definition for this
button.
Error 128 No Communications The keyboard cannot communicate with the Allegiant.
Error Name Description