Bosch I 8 OptiMUM Series, Information For Use

Page: 31 / 140

Troubleshooting en
31
Fault Cause and troubleshooting
Display shows "MO-
TOR OVERLOAD".
Processing quantity is too great or processing time
was too long.
▶
Set the rotary switch to ⁠.
▶
Reduce the quantity of ingredients.
▶
Allow the appliance to cool down to room temperat-
ure.
Appliance or accessory is blocked.
▶
Set the rotary switch to ⁠.
▶ Remove the blockage.
Motor is defective.
▶ If this message keeps on appearing, contact Cus-
tomer Service.
→
"Customer Service", Page 33
Display shows "ARM
OPEN".
Swivel arm was opened.
1.
Set the rotary switch to ⁠.
2.
Move the swivel arm until it engages correctly.
Display shows
"CHECK BOWL".
Bowl or bevel gear is not fitted properly or has be-
come detached.
▶
Turn the bowl anticlockwise as far as possible.
▶
Attach the bevel gear as described in the instruc-
tions for the accessory.
Display shows "ER-
ROR" "SCALES".
1
Appliance has been moved on the work surface.
▶ Lift the appliance and set it down again.
▶ Reset the scales.
→
"Resetting scales", Page 24
Scales are not working properly.
▶ Reset the scales.
→
"Resetting scales", Page 24
Scales are defective.
▶ If this message keeps on appearing, contact Cus-
tomer Service.
→ "Customer Service", Page 33
Scales are exposed to vibrations.
▶
Do not use the appliance on work surfaces ex-
posed to vibrations, e.g. with a dishwasher running.
1
Depending on the appliance specifications