Bosch HSB838357A, Instruction Manual

Page: 15 / 32

Operating the appliance
en
15
Cleaning the burner caps and cups
1.
Clean the burner caps (A) and cups (B) with water
and washing-up liquid.
2.
Dry the parts well.
3.
Place the burner cup (B) onto the burner (C).
4.
Position the burner cap (A) exactly on the burner
cup (B).
Cleaning the accessories
Before using the accessories, clean them thoroughly
using a cloth and warm soapy water.
Fitting the threaded bushes for the rotary
spit
1.
From above, place the threaded bushes into the
holes at the four corners of the universal pan.
2.
Counter the ring nuts from below.
3.
Use a screwdriver to tighten the threaded bushes.
1
Operating the appliance
Operating the appl iance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Hob
Switching on the gas burner
Notes
■
Appliances with a hob cover must only be switched
on if the hob cover is open.
■
The burner caps must always be positioned exactly
on top of the burner cups. The slots on the burner
cup must be free from obstruction. All parts must be
dry.
■
Ensure that the burner is not subjected to draughts
caused by air conditioning systems, fans or similar
appliances.
1.
Press the control knob for the required burner and
turn it to the
—
position.
The gas burner ignites.
2.
Keep the control knob pressed for a few seconds
until the flame stabilises.
3.
Set the desired flame setting.
The flame is not stable between positions
Û
and
—
.
Always select a position between
—
and
˜
.
If the flame goes out
Switch off the control knob. Wait one minute and switch
the burner on again.
:
Warning – Risk of fire!
If the flame goes out, gas will escape. Never leave the
gas burner unattended during operation. Ensure that
there are no draughts.
If the gas burner does not ignite
In the event of a power cut or damp ignition plugs, light
the gas burner with a gas lighter or a match.
Switching off the gas burner
Turn the control knob for the required hotplate to
position
Û
.
$
%
&
Setting Meaning
˜
Economy flame, lowest power
—
Large flame, highest power