Accessories
en
13
The baking tray and the baking and roasting shelf can
be moved into five different heights within the cooking
compartment. Always insert them as far as they will go
so that the accessories do not touch the door panel.
Ensure that you always insert the accessories into the
cooking compartment the right way round.
Telescopic shelf set
The pull-out rails allow you to pull accessories out
completely. When inserting the adapter for the baking
and roasting shelf, ensure that it locks into place in front
of the indentation on the pull-out rails.
Note:
The rotary spit must be inserted on level 1. In this
case, move the pull-out rails for the baking tray and the
baking and roasting shelf to the four upper levels.
:
Warning – Risk of fire!
Under no circumstances should a roasting tin, baking
tray, frying pan or any other form of cookware be
placed directly on the oven floor. This causes the floor
of the appliance to overheat and can seriously damage
the appliance.
Locking function
The accessories can be pulled out approximately
halfway until they lock in place. The locking function
prevents the accessories from tilting when they are
pulled out. The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, ensure that the lug
‚
is at
the rear and is facing downwards. The open side must
be facing the appliance door and the outer rail must be
facing downwards
¾
.
When inserting baking trays, ensure that lug
‚
is at the
rear and is facing downwards. The sloping edge of the
accessory
ƒ
must be facing towards the appliance
door.
Example in the picture: Universal pan
D
D
D
D
E
Summary of Contents for HSB838357A
Page 1: ...en Instruction manual Free standing cooker HSB838357A ...
Page 2: ......
Page 30: ...6 ...
Page 31: ...6 ...