en
Cleaning function
22
Before running the cleaning function
Caution!
Shelf supports and pull-out rails get demaged if they are
left in the cooking compartment when it is cleaned.
Before you start the cleaning function, remove the shelf
supports and pull-out rails from the cooking
compartment.
1.
Remove the shelf supports and pull-out rails from the
cooking compartment.
2.
Remove the worst of the food residues and
remnants from the cooking compartment.
3.
Clean the inside of the appliance door and along the
edges of the cooking compartment in the area
around the seal. Do not scrub the seal.
:
Warning
Risk of fire!
■
Loose food remnants, fat and meat juices may catch
fire when the cleaning function is in progress. Before
you start the cleaning function, always remove the
worst of the food residues and remnants from the
cooking compartment.
Risk of fire!
■
The appliance will become very hot on the outside
during the cleaning function. Never hang
combustible objects, e.g. tea towels, on the door
handle. Do not place anything against the front of
the appliance. Keep children away from the
appliance.
Starting
1.
Turn the function selector to the
V
heating function.
2.
Turn the temperature selector to 280 °C.
The appliance will start the self-cleaning programme.
Notes
■
Moving the function selector or the temperature
selector while the cleaning cycle is in progress will
stop the pyrolytic self-cleaning programme.
■
Activating the childproof lock while the cleaning
cycle is in progress will stop the pyrolytic self-
cleaning programme.
While the self-cleaning programme is in progress, the
appliance door is automatically locked.
One minute after the cleaning cycle (pyrolytic self-
cleaning) has begun, the oven door is locked to prevent
it from being opened. The indicator light lights up to
show that this door lock has been activated. Once the
door lock has been activated, it is no longer possible to
select any functions. To select functions, wait until the
5
indicator light goes out. Even if you cancel the self-
cleaning programme shortly after the door lock is
activated, it may take several minutes until you can
open the oven door.
Note:
You can continue to use the duration and end
time while the pyrolytic self-cleaning programme is in
progress. To achieve a good cleaning result in a lightly
soiled oven, set the programme to run for at least 2
hours. The self-cleaning programme can be set to run
for up to 3 hours, after which the programme will switch
itself off automatically. Take into account the maximum
3-hour programme duration when setting the end time.
Cancelling
To cancel the programme, turn the function selector to
Û
.
Ending
Once the self-cleaning function has run through to the
end, a short audible signal will sound five times. The
appliance door cannot be opened until the temperature
falls below 300 °C and the
5
symbol goes out.
Once the cleaning function has ended
Once the cooking compartment has cooled down, use
a damp cloth to wipe off the ash that has been left
behind in the cooking compartment and around the
appliance door.
Notes
■
Very bad soiling may cause white deposits to remain
on the enamel surfaces. This is residue from the
food and is harmless. It does not affect performance.
You can remove these residues using lemon juice if
required.
■
In case of bad soiling, it’s possible that the cleaning
cycle doesn’t clean the oven completly. In this case,
perform a second cleaning cycle.
Summary of Contents for HSB838357A
Page 1: ...en Instruction manual Free standing cooker HSB838357A ...
Page 2: ......
Page 30: ...6 ...
Page 31: ...6 ...