4.19 Door
spring
If the furniture doors are very heavy (e.g.: marble), the tensile force of
the standard installed springs and maximum pretension of the spring
tensioner is no longer adequate.
The door spring compensates for the weight of the furniture front.
The door springs are situated on the right and left under the base pan.
The tensile force is transferred to the door hinge with a tension cord
via a deflection roller. The clamping force of the spring can be
increased with the enclosed adjusting screw (built-in appliances only)
via the deflection roller.
In this case stronger door springs (see table) may be used.
If furniture doors are very light, the door springs can also be replaced
by lighter ones.
The door springs must be replaced in pairs only!
The maximum furniture door weight is approx.10.5 kg.
Spring force
Coloured dot
Material no.:
Max. weight
of furniture
d
grey
165891
Approx.10.5 kg
green
165736
black
168648
brown
167022
red
165297
max.
min.
yellow
173696
1 kg
A
= Adjusting
screw
B = Spring clamp (deflection roller)
C
= Tension
cord
Note:
The door springs can be identified by a coloured dot on the rear of the
appliance.
202_58300000104305_ara_en_b – 02.11.a
Seite 34 von 56
