Unscrew the outer door. Disconnect the power. Using a screwdriver,
lift the retention plates stamped out of the inner door off the catch
tappets.
Leave the upper basket in the appliance in order to
remove the dispenser; close the door and then press in
the unlocked dispenser.
Wear
protective gloves
; risk of cuts.
Note:
Adjust the retention plates to the middle before installing the dispenser
to ensure that all the catch tappets lock securely.
Before installing the seal, lubricate with washing-up liquid.
4.10 Dispenser
The release mechanism is actuated via an actuator. When the
actuator is actuated for the first time, the detergent-dispenser cover is
opened. At the same time the release pawl engages with the
switching core of the rinse-aid lever so that when the actuator is
actuated again, the dosing plunger is lifted off the rinse aid.
Technical specifications:
Rinse-aid filling quantity
120 ml
Setting
1–6
per
1
ml
Detergent capacity max.
45 g
See Actuator for additional technical specifications.
Removal:
202_58300000104305_ara_en_b – 02.11.a
Seite 23 von 54
