4.9 Hinge
Unscrew the outer door, the base, the angle strip and the side panels;
disengage the tension cord from the hinge lever; unscrew the hinge
lever from the inside door; unscrew the hinge plate from the container
frame.
Unscrew the fixing screw which connects the hinge to the base pan;
lever the hinge plate off the frame; pull the hinge up and out; remove
spring clamp;
Two-piece hinge bearing bush:
Open the bearing bush by disengaging the spacer with a screwdriver
(see sketch)
One-piece hinge bearing bush:
Open the bearing bush by bending up the catches with a screwdriver.
When the bearing bush is removed, it must be renewed.
A
= Hinge
plate
E
= Tension
cord
B
= Hinge
lever
F
= Tension
spring
C
= Bearing
bush
G
= Spacer
D
= Spring
clamp
H
= Catches
202_58300000104305_ara_en_b – 02.11.a
Seite 22 von 54
