Panel Controller
Configuration | en
83
Bosch Sicherheitssysteme GmbH
Operation guide
F.01U.076.969 | 6.0 | 2010.04
18.5
Operator
Depending on whether the same password is used per access level, or whether each user has
a different password, one of the following two options is offered:
If the same password is used per access level:
–
Change universal password
: The same password can be specified for each access level
via the FSP-5000-RPS programming software. This means that all operators with access
authorization for the second level receive the same password, for example. The password
for access levels two to four can be changed.
If each user uses a different password:
–
Change operator data
: Change the password of an operator.
–
Set default password
: Reset an operator password to the following number sequence:
000000.
18.5.1
Change password
1.
Select
Configuration
in the start menu
2.
Operator
3.
Change operator data
A list of all operators is displayed. Refer to
Section 5.6.1 Scrolling through lists, page 28
for information on how to scroll forward and backward through a list.
4.
Select the list field you require.
5.
Enter a new password. Repeat the new password in the bottom field again.
On the display, each digit of the password is indicated with an asterisk so that nobody
else can see the password. Refer to
Section 5.8 Entering numbers and text, page 31
for
information on how to enter figures or text.
6.
Select
OK
to confirm the entry or
Cancel
to cancel the operation.
The entry is confirmed.
18.5.2
Change universal password
1.
Select
Configuration
in the start menu
2.
Operator
3.
Change universal password
4.
Depending on the access level for which the password is to be changed, select the list
field you require.
5.
Enter a new password and repeat the entry in the bottom field again.
On the display, each digit of the password is indicated with an asterisk so that nobody
else can see the password.
6.
Select
OK
to confirm the entry or
Cancel
to cancel the operation.
The entry is confirmed.
NOTICE!
The password must contain at least one character.
Summary of Contents for FPA-1200-MPC
Page 1: ...Panel Controller MPC xxxx B FPA 1200 MPC en Operation guide ...
Page 2: ......
Page 93: ......
