Panel Controller
Fire alarm | en
45
Bosch Sicherheitssysteme GmbH
Operation guide
F.01U.076.969 | 6.0 | 2010.04
9.3
Switching off internal buzzer
Press the following key to temporarily switch off the internal buzzer:
The internal signal tone is switched off.
9.4
Switching external signaling devices on and off
Sounders and optical signaling devices which have been activated can be switched off.
1.
Select
Signals off
.
The sounder and/or optical signaling device is switched off. The text of the field changes
to
Signals on
.
2.
To switch the signaling device back on, select
Signals on
.
The signaling devices are switched on again.
9.5
Resetting external signaling devices and transmission devices
1.
To reset control or transmission devices, select
Control
in the status bar
2.
Select the signaling device.
Only the activated signaling devices are displayed.
3.
Select one or more list fields.
The list field is marked.
4.
Select
Reset
.
The control units are reset to the initial state.
In the
Control
field on the status bar, the number of control elements is reduced by the
number of reset elements.
To reset transmission devices, carry out the same steps, but select
Transmission device
in
step 1.
NOTICE!
On the next alarm message, all signaling devices that have been switched off are switched
back on automatically.
NOTICE!
The display automatically changes back to alarm indication after 30 seconds.
To return to alarm indication before 30 seconds have elapsed, select
Fire
.
Summary of Contents for FPA-1200-MPC
Page 1: ...Panel Controller MPC xxxx B FPA 1200 MPC en Operation guide ...
Page 2: ......
Page 93: ......
