Bosch FPA-1000-UL, Installation And Operation Manual

Page: 37 / 140

Analog fire panels Planning Information | en 37
Bosch Security Systems, Inc. Installation and Operation Guide 2017.11 | 2.0 | F.01U.173.607
Circuit Address [C or CC] Fixed Circuit Address Assignment
1 SLC 1
2 SLC 2
3 Mainboard (MB)
4 Option Bus (OB)
Tab. 3.20: Fixed circuit address assignment
3.4.1 Option Bus Address Assignment
Each Option Bus device must be set to a unique address ranging 1 to 23. Observe the address
restrictions listed in the following table.
Address Fixed Address Assignment
1 to 8 LED Annunciators (for model types, see Modules, page 16 )
9 to 10 D7035/B Octal Relay Module or D7048/B Octal Driver Module
11 to 14 FPP-RNAC-8A-4C Remote Notification Appliance Circuit Power Supply
16 to 23 FMR-1000-RCMD or FMR‑1000‑RA LCD annunciator
Tab. 3.21: Option bus address restrictions
Zone LED Mapping
The panel supports up to eight pairs of D7030X Family/D7032 annunciators allowing a total of
128 (8 x 16) zone LED indications.
All D7030X/D7032 LEDs are mapped to either (not both) local (1-128) or group (129-225)
zones. For an explanation of how to map the LEDs to zones, see the following table.
Option Bus
Address
Local Zones Group Zones
D7030X D7032 D7030X D7032
1 1 - 8 9 - 16 129 - 136 137 - 144
2 17 - 24 25 - 32 145 - 152 153 - 160
3 33 - 40 41 - 48 161 - 168 169 - 176
4 49 - 56 57 - 64 177 - 184 185 - 192
5 65 - 72 73 - 80 193 - 200 201 - 208
6 81 - 88 89 - 96 209 - 216 217 - 224
7 97 - 104 105 - 112 225
8 113 - 120 121 - 128
Tab. 3.22: Zone LED mapping
Every Option Bus address is mapped to 16 zones, regardless of whether a D7030X exists or
whether a D7032 is attached to the D7030X on that address.
If a D7030X-S2 is used instead of D7030X, the first two yellow LEDs (Supervisory) are mapped
to the first two zones that are associated with the address. If a D7030X-S8 is used instead of
D7030X, the first eight yellow LEDs (Supervisory) are automatically mapped to the first eight