14
Installation
Attention! Do not connect the appliance to the power supply until installation is complete.
The cooker hood is designed to be wall
-
mounted .
Note
:
Special accessories may be required for the installation.
• To make mounting operations easier, draw the central line
on the wall (1), put the paper template in such a way that its
central line coincides with the one on the wall, and the bottom
of the template corresponds
to
the bottom of the hood when
the latter is mounted (2).
G
1
• Drill 2
Ø
8 mm holes and place the rawlplugs with the hooks
(3).
• Fix the duct support bracket «G» on the wall contiguous with
the ceiling, use the support bracket as a template to drill the
holes (if there is any small oval hole in the bracket, it should
coincide with the central line drawn on the wall)
–
mark 2 holes
with the pencil, drill 8mm. holes, fix 2 plugs. Fix the duct support
bracket to the wall with 2 5х45mm. screws (4).
• Hang the hood on the brackets (5)
• Adjust the position (6).
• Mark the holes for the final mounting (7
-
8).
5
5
3
3
2
6
7
8
