13
Electrical connection
Ma
ins voltage should correspond
to
the voltage indicated on the
rating plate found inside the hood. If the hood is equipped with a
plug, connect it to a plug connector which meets the applicable
regulations and
is
easily accessible. If the plug is not applicable
(direct connection to power supply), or if the plug connector is
not accessibile
–
use the appropriate bipolar switch providing
complete disconnection from the power supply in case of
overvoltage of category III
,
according to the installation
instructions.
Attention
:
before connecting the hood to the mains
supply and test its proper functioning, make sure that
power cable is connected properly.
