16
Installation
•
Place the decorative chimney above the hood.
Lower the upper part and fix it with 2 screws 2,9x6,5
mm. to the support bracket (14).
•
Screw up 4 dowels to fix the ladle holder
.
•
Insert the ladle holder and block it with 2 dowels.
•
Fix grease filters.
Attention
!
If the hood
is
used in evacuation mode,
remove the charcoal filter, if present (see the appropriate
paragraph).
If the hood is used in recirculation mode, make sure the
charcoal filter is fixed, and if it’s not
–
purchase and install
one.
14 14
