15
Installation
9
•
Remove the hood from the wall (9).
•
Drill 4
Ø
8mm. holes and place 4 rawplugs (10).
10
• Fix the hood on the wall again (11)
•
Fasten the hood with 4 screws 5x45 mm. (12).
•
Make all the electrical connections, but leave the hood
disconnected from home mains supply.
•
Evacuation mode only:
Connect the vent pipe (13A
–
the pipe and the attachment
clip are not included in the kit, purchase it separately) to the
ring located above the motor suctioning unit.
In the case of the evacuation mode , connect the other
end of the pipe to the vapor exhaust system.
•
Internal recirculation mode:
If you want to use the hood in recirculation mode, place the
chimney cap F on the duct support bracket G and connect
the other end of the pipe to the connecting ring located on
the chimney cap (13F).
9
10
11
11
12
12
13A
G
F
13F
