Bosch DVR4C Series, Applications Manual, Page: 31 / 46

DVR4C Motion Only and Continuous Recording | en 15
Bosch Security Systems, Inc. Applications Manual F01U074954 | 1.0 | 2007.07
b. Select the Camera Mode ( Figure 6.2 Reference B) for each of the four (4) cameras.
For example, for non-stop recording 24 hours a day, 7 days a week, select
Continuous for the appropriate camera(s).
c. Select the event recording time ( OFF , Follows , or 1-120 seconds ) and the pre-event
recording time ( OFF or 1-30 seconds ). See Figure 6.2 Reference C and D.
5. When finished, click Apply .
6.2 Profiles Tab
The Profiles tab consists of two (2) components: scheduling and exception days. The schedul-
ing section corresponds with the information setup in the Recording tab. The default times
are: Weekday Day 8 AM to 6 PM, Weekday Night 6 PM to 8 PM, Weekend Day 8 AM to 6 PM,
and Weekend Night 6 PM to 8 PM.
The
Exception Days group tab allows the user to define specific days, such as holidays or
special hours of operation, in addition to the regular schedule for recording.
6.2.1 Configuring Scheduling Times
To configure the DVR4C time schedule for recording, do the following:
1.
Click the Profiles tab ( Figure 6.3 ).
2. Select the day of the week to begin and end your day ( Figure 6.3 Reference B). Everything
else is considered the weekend. For example, if the user’s work week is Monday -
Thursday, the DVR4C automatically considers Friday - Sunday the weekend.
3. Select the time of the day to begin and end your day ( Figure 6.3 Reference B). Everything
else is considered night time. For example, if the user’s work week starts at 7 AM and
ends at 6 PM, the DVR4C automatically considers 6:01 PM- 6:59 AM as night time.
4. When finished, click Apply .
6.2.2 Configuring Exception Days
To configure the DVR4C for exception days, do the following:
1.
Click the Profiles tab ( Figure 6.3 ).
2. Within the Exception Days box, select the appropriate No. field (1-30) to input the
exception day information.
3. Click the Start Time & Date (month, date, time: up to 24 hours) input box and enter the
appropriate information.
4. Click the Profile field and select the appropriate profile.
5. Click the Duration field and enter the appropriate information.
6. Click Modify to accept any changes.
7. Follow steps 2-6 to enter multiple exception days.
8. When finished, click Apply .