Bosch DVR4C Series, Applications Manual

Page: 29 / 46

DVR4C Motion Only and Continuous Recording | en 13
Bosch Security Systems, Inc. Applications Manual F01U074954 | 1.0 | 2007.07
To add a DVR to the list via PSTN:
–
Select Dial-in and fill in the name and phone number of the new DVR manually and click
OK .
– The phone number to be filled-in is set in the System settings / Connectivity / Network
setup menu of the DVR.
To control a particular DVR (only administrators can log in):
–
Select the DVR you want to control.
– Type your user name and password.
The user name is always
admin .
The password to be filled-in is set in the System settings / Connectivity / Network access
menu of the DVR4C itself.
To modify the DVR list:
–
Right-click the mouse on the DVR you want to modify.
– Select Delete or Rename from the drop-down menu.
6 Motion Only and Continuous Recording
The DVR4C can be set up for Motion Only , Continuous , and Motion Only + Auto Snapshot
recording by configuring information in three (3) of the menu tabs: Recording , Profiles , and
Event Setup . Motion Only recording is used to record only when motion is detected,
Continuous recording is used to record non-stop, and Motion Only + Auto Snapshot is used to
record only when motion is detected along with an automatic snapshot image.
6.1 Recording Tab
The Recording tab allows the user to set four (4) customized parameters ( Weekday Day ,
Weekday Night , Weekend Day , and Weekend Night ) for the time period in which recording is
set. For example, a user who has a high traffic store during the weekday may want to set the
DVR4C’s
Weekday Day tab for Superior quality with 15 IPS . In addition, if the user does not
have much traffic or the store is closed on weekday nights, the user may set the Weekday
Night tab to Medium quality with 7.5 IPS .
The event and pre-event recording times are used to define the specified amount of time that
the DVR4C records when motion is detected. For example, if the user sets the
Event
Recording Time to Follows , the DVR4C begins to record as soon as motion is detected and
stops recording when the motion has stopped. The user may also set the Pre-event Recording
Time . For example, if the user sets the pull-down list for the Pre-event Recording Time to
10 seconds , the DVR4C records for 10 seconds prior to the event.