background image

 

xi

Bosch Security Systems, Inc.

F01U074954 | 1.0 | 2007.07

FCC & ICES INFORMATION (commercial applications)

(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is subject to the following 

conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference that may cause 
undesired operation.

NOTE:  This equipment has been tested and found to comply with the limits for a Class A 

digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These 

limits are designed to provide reasonable protection against harmful interference when the 

equipment is operated in a commercial environment. This equipment generates, uses, and 

radiates radio frequency energy and, if not installed and used in accordance with the 

instruction manual, may cause harmful interference to radio communications. Operation of 

this equipment in a residential area is likely to cause harmful interference, in which case the 

user will be required to correct the interference at his expense.
Intentional or unintentional modifications, not expressly approved by the party responsible for 

compliance, shall not be made. Any such modifications could void the user's authority to 

operate the equipment. If necessary, the user should consult the dealer or an experienced 

radio/television technician for corrective action. 
The user may find the following booklet, prepared by the Federal Communications 

Commission, helpful: 

How to Identify and Resolve Radio-TV Interference Problems

. This booklet is 

available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-

000-00345-4.

Summary of Contents for DVR4C Series















































Reviews: