6 720 821 651 (2017/05)
CRC200
24 | Service menu
8.4
Info menu
Heating system settings and measurements are displayed in
this menu. No changes can be made.
Menu item
Possible values
Description
Outdoor Temp.
(
)
– 40...122 °F
( – 40...50 °C)
The currently measured outdoor temperature is available only if an outdoor
temperature sensor is installed.
Appl. oper.
ON
Burner operating
OFF
Burner not operating
Appl.set sply
68...194 °F (20...90 °C)
Supply temperature required at the heat source (set temperature)
Appl.act.sply
68...194 °F (20...90 °C)
Supply temperature measured at the heat source (actual temperature)
Appl.max.sply
95...194 °F (35...90 °C)
Maximum supply temperature set at the heat source
LLH Temp.
68...194 °F (20...90 °C)
Current hot water temperature in the low-loss header
HC Operation
OFF
Current operating mode of assigned heating zone,
User interface operating
instructions
Heating
Setback
Summer
Manual
HC set.sply
68...194 °F (20...90 °C)
Required supply temperature in assigned heating zone
HC act. sply.
68...194 °F (20...90 °C)
Measured supply temperature in heating system
Set Room Temp
OFF
Heating switched off, e. g. in the summer
41...86 °F (5.0...30.0 °C)
Desired room temperature
Room Temp.
41...86 °F (5.0...30.0 °C)
Measured room temperature
DHW Operation
ON
Water heating active
OFF
Water heating not active
Set DHW Temp
59...176 °F (15...80 °C)
Desired hot water temperature
DHW Temp.
59...176 °F (15...80 °C)
Measured hot water temperature
Table 10 Info menu
Summary of Contents for CRC200
Page 32: ......
