6 720 821 651 (2017/05)
CRC200
6 | Product Description
2.2
Important instructions for use
•
The user interface may be connected only to heat sources
with Bosch EMS-BUS or CZM100 for multi-zone
applications.
•
This user interface is intended only for wall-mounted
installation (
Chapter 3, starting at page 7).
2.3
Scope of delivery
Fig. 3
Scope of delivery
[1]
User interface
[2]
Technical documentation
[3]
Screws and anchors
WARNING:
Risk of scalding!
▶ If hot water temperatures are set above
140 °F (60 °C) or thermal disinfection is
switched on, a mixer must be installed.
NOTICE:
Risk of damage to the floor!
▶ Radiant floor heating must be installed
only as a heating zone with mixer and an
additional temperature switch to protect
the floor from overheating, by delivering
too hot supply water.
6 720 811 156-02.1O
B
U
S
B
U
S
i
i
1
2
3
Summary of Contents for CRC200
Page 32: ......
