Bosch CEG732X.1B, User Manual And Installation Instructions

Page: 11 / 32

Microwave
en
11
ATTENTION!
Metal touching the wall of the cooking compartment
will cause sparks, which may damage the appliance or
the inner door pane.
▶
Metal (e.g. a spoon in a glass) must be kept at least
2 cm from the cooking compartment walls and the
inside of the door.
Not microwave-safe
Cookware and accessor-
ies Reason
Metal cookware Metal does not allow mi-
crowaves to pass
through. The food hardly
heats up.
Cookware with gold or sil-
ver decoration Microwaves can damage
gold and silver decora-
tion.
Tip:
You can only use this
kind of cookware if the
manufacturer guarantees
that it is microwave-safe.
8.3 Testing cookware for microwave
suitability
Test cookware to see whether it is suitable for mi-
crowave use. Testing cookware is the only time the ap-
pliance should be operated in microwave mode without
any food inside.
WARNING ‒ Risk of scalding!
The accessible parts of the appliance become hot dur-
ing operation.
▶
Never touch these hot parts.
▶
Keep children at a safe distance.
1. Place the empty cookware in the cooking compart-
ment.
2. Set the appliance to the maximum microwave power
setting for 30 seconds to 1 minute.
3. Start the operation.
4.
Check the cookware several times:
– If the cookware is cold or warm to the touch, it is
suitable for microwave use.
– If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
8.4 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡
Follow the safety instructions.
¡
Observe the instructions on how to prevent material
damage. →
Page 6
¡
Observe the information on microwave-safe cook-
ware and accessories.
1. In the menu press "Microwave".
‒
Or select the microwave directly using the touch
field ​⁠.
2.
Press the microwave output in watts.
3. Use the setting ring to set the microwave output.
4.
To confirm the microwave output, press ​⁠ on the
display.
5.
Press ​⁠ "Cooking time".
A cooking time must always be set to operate the
microwave.
6.
To change the preset cooking time, press the relev-
ant time value, e.g. minute display "m" or second
display "s".
a
The selected value is marked in blue.
7.
Use the setting ring to set the cooking time.
If required, use ​⁠ to reset the setting value.
8.
To confirm the set cooking time, press ​⁠.
9.
Press ​⁠ to start the operation.
a
The microwave starts and the cooking time counts
down. At the maximum microwave power "boost" ,
the display shows the power reduction.
a
When the time has elapsed, a signal tone sounds. A
message appears on the display confirming that the
operation has finished.
10. Once the cooking time has elapsed:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use ​⁠ to switch the ap-
pliance off.
11.
Dry the cooking compartment.
Tip:
To ensure optimum use of your appliance, you can
refer to the information in the recommended settings.
→
"How it works", Page 22
8.5 Changing the microwave output
You can change the microwave output setting during
operation.
1.
Press ​⁠.
2.
Press the set microwave output setting.
3.
Use the setting ring to set the microwave output.
4.
Press ​⁠.
8.6 Changing the cooking time
1. Press ​⁠.
2.
Press the set "Cooking time".
3. To change the preset cooking time, press the relev-
ant time value, e.g. minute display "m" or second
display "s".
a
The selected value is marked in blue.
4.
Use the setting ring to set the cooking time.
If required, use ​⁠ to reset the setting value.
5.
Press ​⁠.
8.7 Extending the cooking time
Once the cooking time has elapsed, you can continue
cooking the meal.
1.
Press "Continue cooking".
2. Set the required cooking time.
→
"Setting the cooking time", Page 15
You can reset the set cooking time using ​⁠.
3.
Press ​⁠.
4.
Use ​⁠ to start the operation.
8.8 Pausing the operation
1. Open the appliance door or press ​⁠.
a
Operation is paused.
2.
To continue operation, close the appliance door and
press ​⁠.
a Operation continues.