Bosch Avantixx WVD24460GB Operating And Installation Instructions Download Page 56

Page: 56 / 64

Useful tools

The following tools are helpful:

– Box wrench A/F 13 for removing the transportation

bolts.

– Spirit level for aligning the washer-dryer.

Dimensions

= 600 mm

= 560 mm

= 850 mm

Weight 67 kg

Installation surface

Appliance stability is important so that the washer-dryer
does not "wander" during the spin cycles.

The installation surface must be solid and level. Soft
floor coverings, e. g. carpets or floor coverings with a
foam backing are not suitable.

If the washer-dryer is to be installed on a wooden floor:

■

If possible, install the washer-dryer in a corner.

■

Screw a water-resistant wooden board (at least 30

mm thick) to the floor.

■

Secure the washer-dryer feet with fixing brackets*.

If the washer-dryer is to be installed on a base:

■

Secure the washer-dryer feet with fixing brackets*.

* Holding brackets (set) can be obtained from a

specialist store or the Customer Service, order no.

WMZ 2200.

Summary of Contents for Avantixx WVD24460GB

































































Search results

Summary of Contents for Avantixx WVD24460GB

Reviews:

Related manuals for Avantixx WVD24460GB

Brands by name

Popular brands

Bosch Avantixx WVD24460GB, Operating And Installation Instructions

Search results

Summary of Contents for Avantixx WVD24460GB

Reviews:

Related manuals for Avantixx WVD24460GB

Brands by name

Popular brands