60
Connecting the power
m
Caution
Connect the washer-dryer only to an alternating current
via a correctly installed earthed socket.
The mains voltage must correspond to the voltage
specification on the washer-dryer (nareplate).
Connection specifications as well as the required fuses
are stipulated on the appliance nameplate.
Ensure that:
– The mains plug and socket are compatible.
– The cable cross-section is adequate.
– The earthing system has been installed correctly.
The mains cable may be changed (if required) by an
electrician only.
Replacement mains cable available from Customer
Service.
Do not use multiple plugs/sockets or extension cables.
In the event that an earth-leakage circuit breaker is to
be used, only use types marked with the following
symbol:
z
Only this symbol can guarantee compliance with all
current regulations.
Do not insert/pull out the mains plug with wet hands.
Do not pull out the mains plug by tugging the cable.