12
Before using your washer-dryer for the first
time
Preparing your
washer-dryer
Caution
The washer-dryer must have been installed and
connected properly (refer to page 53).
²
The washer-dryer was tested before leaving the
factory. To remove any water left over from testing
procedures, the first washing cycle should be
carried out
without
laundry in the machine.
■
Turn the tap on.
■
Pull out the detergent drawer all the way.
■
Pour approx. 1 litre of water into chamber
II
of the
detergent dispenser.
■
Half fill the measuring beaker with detergent and
pour into chamber
II
.
²
Do not use any special detergents for delicates or
woollens (excessive foam).
■
Close the detergent drawer.
■
Close the washer-dryer door.
■
Set the programme selector to
Cottons
ic
with
washing temperature
90°C
.
■
Touch the
Start/Pause
A
button. The programme
starts.
The programme ends when the programme duration is
on -0-:
■
Turn the programme selector to
Off.
